User`s guide

INTRODUCTION TO THE VRX932LA-1
The VRX932LA-1 is a two-way, line-array loudspeaker system intended for use in arrays of up to six enclosures.
Three high-frequency drivers are mounted to the Constant Curvature waveguide which is designed so that
multiple enclosures may be arrayed with no discontinuity in the vertical coverage pattern. As a result, the array
will behave in much the same way as would a single loudspeaker. Array coverage may be adjusted by means
of the Array Configuration Selector (ACS), a feature that provides amplitude shading (see page 14 & 15) when
the system is used in passive mode. Integral rigging hardware, a dual angle pole socket and an accessory array
frame provide for a variety of mounting and suspension options.
NOTE: The VRX932LA-WH is designed for fixed install situations where white loudspeakers are required to
match existing decor. White versions therefore do not have handles, feet or pole mount features.
DIMENSIONAL DRAWINGS FOR VRX932LA-1
JBL PROFESSIONAL
Northridge, CA USA
Made in USA
Serial No.
BI-AMP
PASSIVE
PARALLEL
VRX932LA
BI-AMP
±1 LF: 8
±2 HF: 6
W
W
PASSIVE
±1 IN: 6
±2 N/C
W
Single
Speaker
or
Short
Throw
Mid
Throw
Long
Throw
Array Configuration Selector - HF Output Level
Equipped with Differential Drive
Transducer Technology U.S. PATENT 5,748,760
Dimensions in mm (inches)
349
(13.75)
376
(14.8)
597
(23.5)
R: 1325
(52.2)
15
o
4
VRXpassive_UG_091907_final.qxp 9/20/07 4:56 PM Page 4