User`s manual

Conguring SATA Hard Drive(s)

- 78 -

Figure 2

C.ConguringaRAIDarrayinRAIDBIOS

EntertheRAIDBIOSsetuputilitytocongureaRAIDarray.Skipthisstepandproceedtotheinstallationof

Windowsoperatingsystemforanon-RAIDconguration.

After the POST memory test begins and before the operating system boot begins, look for a message which

says"Press<Ctrl>+<M>toenterBIOSSetupor<Space>tocontinue"(Figure2).Press<Ctrl>+<M>toenter

the RAID setup utility.

OnthemainscreenoftheRAIDsetuputility(Figure3),usetheleftorrightarrowkeytomovethroughtabs.

Figure 3

Marvell 88SE91xx Adapter - BIOS Version 1.0.0.0034

PCIe x1 5.0Gbps

Mode: RAID

[Virtual Disks]

No Virtual Disk!

[Physical Disks]

Adapter 0

Port Disk Name Size Max Speed

S0 SATA: WDC WD800JD-22LSA0 76.3GB SATA 3Gb/s

S1 SATA: WDC WD800JD-22LSA0 76.3GB SATA 3Gb/s

Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue_

ENTER/SPACE: Select, ESC: Back/Exit

Adapter 0

[ Adapter ] [ Devices ] [ RAID ]

Vendor ID Device ID: 1B4B:9192

BIOS Version: 1.0.0.0034

PCI Slot: 00

IRQ Number: 0A

Raid Mode: RAID0 RAID1