User`s manual

- 59 -
BIOS Setup
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support.(Default:Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support.(Default:Disabled)
& USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
& Two Layer KVM Switch
Set to EnabledtoensureproperdevicefunctionalitywhenchainingtwoKVMswitches.(Default:Disabled)
& OnBoard LAN Controller (Qualcomm
®
Atheros Killer E2201 LAN Chip, LAN1)
Enables or disables the Qualcomm
®
AtherosKillerE2201LANfunction.(Default:Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
` SATAConguration
& Integrated SATA Controller
 EnablesordisablestheintegratedSATAcontrollers.(Default:Enabled)
& SATA Mode Selection
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheChipsetorcongurestheSATAcontrollers
to AHCI mode.
IDE   CongurestheSATAcontrollertoIDEmode.
RAID Enables RAID for the SATA controller.
AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)