Owner manual

Use a <Del> key for delete of current device from list of default devices. There isn’t possible

to empty this list, if you repeat this access. The last device stays in buffer and the <Del> key

isn't accepted.

Device / Select device...

This window allows selecting the desired type of the device from all devices supported by

current programmer. It is possible to choose device by name, by type or by manufacturer.

Note 1: The names of the programmable devices in software don't contain all characters,

shown at the top of the chip or mentioned in the datasheet section part numbering. The

names contain all characters necessary to identification of the device, but don't contain such

codes, that have none influence to the programming, for example temperature code, speed

code, packing type code, etc.. If such code letter is at the end of the name, is omitted, if such

code letter is in the middle of name, then is replaced by character 'x'.

Examples:

• Devices Am27C512-150, Am27C512-200 and Am27C512-250 are shown in the software

only once, as Am27C512

• S29GL064N11TF1010 device is shown in the software as S29GL064NxxTxx01

Note 2: If some device is listed twice and the second time with suffix x16, it means, that

programming algorithm provides faster word mode.

Selected device is automatically saved to buffer of default devices. This buffer is accessible

with Device / Select from default devices command.

In the Search mask field you can enter mask for filtering of whole device list by device name,

manufacturer and/or programming adapter names. The space as delimiter of filter items

(fragments) has "OR" function. If you want to enter exact filter string including spaces, use

quotation mark character ".

Example:

We need to see the devices that need no adapter, and we know that such devices have

following note string in Adapter column of device list: Note: in ZIF socket of programmer. The

suitable filter to show only wished devices is "in ZIF" (including quotation marks). The filter

strings are not case sensitive, i.e. for example "ZIF" is the same as "zif".

If you wish display additional information about the current device, use button Device info or

an <Ctrl+F1> key. This command provides a size of device, organization, programming

algorithm and a list of programmers (including auxiliary modules) that supported this device.

You can find here package information and other general information about current device

too.

The currently displayed device list can be saved to text file by pressing button Save currently

displayed list to file.

Select device ... / All

This window allows selecting the desired type of the device from all devices supported by

current programmer. Supported devices are displayed in a list box.