Owner manual

Bottom half is user editable and contains project description (arbitrary text) which usually
consists of project author and some notes.
Checkbox Encrypt project file (with password) is used to save project in special format
using encryption algorithm. This prevents loading project file into software without knowledge
of password. After clicking the button with key, password dialog appears, which is used to
specify encryption password for project being saved.
Checkbox Set Protected mode of software after loading of this project file is used to
save project in special mode called Protected mode. After clicking the button with key,
password dialog appears, which is used to specify Protected mode password for project
being saved, and another security options (disable other project loading, device operations
restriction) to prevent operator's mistakes. Projects saved with active Protected mode are
special projects called Protected mode projects. For more detailed information about
Protected mode projects see Options / Protected mode
Recommendation: passwords for Encrypt project file (with password) and Set Protected
mode of software after loading of this project file should not be the same.
Checkbox Require project file checksum before first programming when active, software
asks user for entering correct project checksum before allowing to start the first device
programming. This feature is recommended for additional check, that correct project file is
recently loaded. There is also recommended to use this checkbox along with active
Protected mode.
File / Reload file
Choose this option to reload a recently used file.
When you use a file, it is added to the Reload file list. Files are listed in order depending on
time of use of them. Lastly used files are listed before files used far off.
To Reload a file:
1. From the File menu, choose Reload file.
2. List of lastly used files is displayed. Click the file you want to reload.
Note: When reloading a file the file format is used, by which the file was lastly loaded/saved.
File / Reload project
Choose this option to reload a recently used project.
When you use a project, it is added to the Reload project list. Projects are listed in order
depending on time of use of them. Lastly used projects are listed before projects used far off.
To Reload a project:
1. From the File menu, choose Reload project.
2. List of lastly used projects is displayed. Click the project you want to reload.
57