Owner manual

Note: H/L/read 844USB driver

H/L/read driver

in programmer

pin of ISP

connector

PU/PD driver

in programmer

C1=1nF, R1=1k3, R2=22k

Selftest

If you feel that your programmer does not react according to your expectation, please run the

programmer selftest using Diagnostic POD, enclosed with the standard delivery package.

• Insert 40 pins diagnostic POD - type I into ZIF socket of the programmer. 40 pins

diagnostic POD - type I must be inserted as 40 pins device.

• Run selftest of programmer in PG4UW (Programmer / Selftest plus).

Technical specification

HARDWARE

Programmer

• two D/A converters for VCCP and VPP, controllable rise and fall time

• VCCP range 2..7V/350mA

• VPP range 2..25V/200mA

• USB 2.0/1.1 compatible interface

• selftest capability

ZIF socket, pindriver

• 40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins

• pindriver: 40 TTL pindrivers, universal GND/VCC/VPP pindriver