Owner manual

Installing programmer hardware

• connect the USB port of programmer to a USB port of PC using supplied cable

• connect the connector of the power supply adapter to the programmer or turn on

programmer by switch

Installing the programmer software

Run the installation program from the CD (setup.exe) and follow the on-screen instructions.

Please, for latest information about the programmer hardware and software see

www.bkprecision.com.

Run the control program

Double click on

After start, control program Pg4uw automatically scans all existing ports and searches for

some connected B+K PRECISION programmer. Program Pg4uw is common for some B+K

PRECISION's programmers, hence Pg4uw will try to find all supported programmers.

Menu File is used for source files manipulation, settings and viewing directory, changes

drives, changes start and finish address of buffer for loading and saving files and loading and

saving projects.

Menu Buffer is used for buffer manipulation, block operation, filling a part of buffer with string,

erasing, checksum and of course editing and viewing with other items (find and replace

string, printing...).

Menu Device is used for a work with selected programmable device: select, read, blank

check, program, verify, erase and setting of programming process, serialization and

associated file control.

Menu Programmer is used for work with programmer.

Menu Options is used to view and change various default settings.

Menu Help is used for view supported devices and programmers and information about

program version.

Programming a device

1. select device: click on

2. load data into buffer:

a) from file: click on

b) from device: insert device to ZIF and click on

3. insert target device to ZIF