User Manual

Examples of the three conditions of operation are illustrated in the following diagram:

Power-on state

The default power-on instrument state is to not remember the instrument mode settings before the

last power-down. If you wish to have the mode settings remembered across a power-down, power-

up cycle, use the following keystrokes:

Key Display

Shift + Menu :CONFIG

Enter :INITIAL CONFIG

▽ :INPUT RECALL

▽ :POWER-ON RECALL

Enter :OFF <DEFAULT>

▽ :ON

Enter :POWER-ON RECALL

Esc :CONFIG

8500 DC Load Series Version: 030614 Page 31 of 77

Steady state

Transient

Dynamic

Repeat

Time