User`s manual

• spare GND, VCCP and VPP driver, which add additional

made-by-wire GND/VCCP/VPP pin capability for future

devices

• FPGA based TTL driver provides H, L, CLK, pull-up, pull-

down on and read for all pindriver pins,

• level H selectable from 1.8 V up to 5V

• in-circuit serial programming (ISP) capability included

ISP connector

• 6-pin male type with missinsertion lock

• 4 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level

H selectable from 1.8V up to 5V to handle all (low-voltage

including) devices.

• 1x target voltage sense pin

• Atmel AN AVR910 compatible pinout

DEVICE SUPPORT

Programmer, in ZIF socket

• microcontrollers MCS51 series: 87Cxxx, 87LVxx, 89Cxxx,

89Sxxx, 89LVxxx, LPC series from Atmel, Atmel W&M, Intel,

Philips, SST, Winbond, ... 8-40 pins (*1)

• microcontrollers Atmel AVR: ATtiny, AT90Sxxx, ATmega

series (parallel and serial mode), 8-40 pins (*1)

• Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx,

93Cxxx series

Programmer, through ISP connector

• Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny,

ATmega series

• Microcontrollers Philips: LPC series

Note:

• For all supported devices see actual Device list on

www.bkprecision.com.

Programming speed

Device Operation Time

AT89C52 programming and verify 15 sec

T87C5111 programming and verify 14 sec

Conditions: P4, 2,4GHz,ECP, Windows XP

SOFTWARE

• Algorithms: only manufacturer approved or certified

algorithms are used.

• Algorithm updates: software updates are available approx.

every 2 weeks, free of charge.

• Main features: revision history, session logging, on-line help,

device and algorithm information