User`s manual

Note: H/L/read 849 driver.

H/L/read driver

in programmer

pin of ISP

connector

PU/PD driver

in programmer

Selftest and calibration

If you feel that your programmer does not react according to

your expectation, please run the programmer selftest using

Diagnostic POD, enclosed with the standard delivery package.

For optimal results with programmer we recommend you

undertake every 6 months, an extended test and to check the

calibration. See instructions for selftest in the Diagnostics

menu of PG4UW.

Technical specification

HARDWARE

Socket, pin drivers and DACs

• FPGA based IEEE 1284 slave printer port, up to 1MB/s

transfer rate

• 40-pin DIL ZIF (Zero Insertion Force) socket accepts both

300/600 mil devices up to 40-pin

• two D/A converters for VCCP and VPP, controllable rise and

fall time

• VCCP range 0 – 6.5V / 150mA

• VPP range 0 – 15V / 100mA

• special GND/VCCP/VPP pindriver for MCS51 and AVR

devices