User`s manual

programmed device from the ZIF socket. Incorrectly placed

device in the ZIF socket can cause its damage or destruction.

Technical specification

HARDWARE

Programmer

• two D/A converters for VCCP and VPP, controllable rise and

fall time

• VCCP range 0..7V/350mA

• VPP range 0..25V/200mA

ZIF socket, pindriver

• 32-pin DIL ZIF (Zero Insertion Force) socket accepts both

300/600 mil devices up to 32-pins

• pindriver: TTL pindrivers and GND/VCC/VPP pindrivers,

specialized for memory programming

• TTL driver provides level H also for support of low voltage

devices

DEVICE SUPPORT

Programmer

• EPROM: NMOS/CMOS, 27xxx and 27Cxxx series, with 8 bit

data width, full support of LV series (*1*2)

• EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series,

with 8 bit data width, full support of LV series (*1*2)

• Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx,

29Wxxx, 49Fxxx series, with 8 bit data width, full support of

LV series (*1*2)

• Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx,

93Cxxx, full support of LV series(*1)

• NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK

STKxxx, XICOR 2xxx, ZMD U63x series

Notes:

o (*1) - suitable adapters are available for non-DIL packages

o (*2) - There exist none adapters for devices with more than

32 pin. Therefore think please about more powerful

programmer (865, 866, 864, 844USB, 844A), if you need to

program devices with more than 32 pins

• For all supported devices see actual Device list on

www.bkprecision.com.

I.C. Tester

• Static RAM: 6116 .. 624000