User`s manual

Device operations

• standard:

• automatic ID-based selection of EPROM/Flash EPROM

• blank check

• read

• program

• verify

• erase

• configuration and security bit program

• illegal bit test

• security:

• contact check

• ID byte check

• special

• auto device serial number increment

Buffer operations

• view/edit, find/replace

• fill/copy, move, byte swap, word/dword split

• checksum (byte, word)

• print

Supported file formats

• unformatted (raw) binary

• HEX: Intel, Intel EXT, Motorola S, MOS, Exormax, Tektronix,

ASCII-space-HEX

• JEDEC

PC system requirements

See section Introduction/ PC requirements

GENERAL

• operating voltage 12..15V DC, max. 500mA

• power consumption 6W max.

• dimensions 160x110x50 mm (6.3x4.3x2 inch)

• weight (without external adapter) ca. 650g (23 oz)

• temperature 5°C ÷ 40°C (41°F ÷ 104°F)

• humidity 20%..80%, non condensing

Package included

• 848 programmer

• connection cable PC-programmer

• wall plug adapter, 12V DC/500mA, unstabilized

• diagnostic POD, that enable programmer's self test