User`s manual

• program

• erase

• configuration and security bit program

• illegal bit test

• checksum

• security

• insertion test

• contact check

• ID byte check

• special

• auto device serial number increment

• statistic

• count-down mode

Buffer operations

• view/edit, find/replace

• fill, copy, move, byte swap, word/dword split

• checksum (byte, word)

• print

File load/save

• no download time because programmer is PC controlled

• automatic file type identification

Supported file formats

• unformatted (raw) binary

• HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax,

Tektronix, ASCII-SPACE-HEX

• JEDEC (ver. 3.0.A), for example from ABEL, CUPL,

PALASM, TANGO PLD, OrCAD PLD, PLD Designer ISDATA

etc.

PC system requirements

See section Introduction/ PC requirements

GENERAL

• operating voltage 15..20V DC, max. 500mA

• power consumption max. 6W active, 1.4W inactive

• dimensions 160x97x35 mm (6.3x3.8x1.4 inch)

• weight (without external power adapter) ca. 500g (17.65 oz)

• temperature 5°C ÷ 40°C (41°F ÷ 104°F)

• humidity 20%..80%, non condensing

Package included

• 844USB programmer

• connection cable PC-programmer