User`s manual

Technical specification

HARDWARE

Socket, pin drivers and DACs

• 48-pin DIL ZIF (Zero Insertion Force) socket accepts both

300/600 mil devices up to 48-pin

• Three D/A converters for VCCP, VPP1, and VPP2, with

controllable rise and fall time and current limitation

• TTL driver provides H, L, CLK, pull-up, pull-down, or tri-state

on all 48 pins

• full support of Low Voltage circuits from 1.8 V up

• autocalibration

DEVICE SUPPORT

Programmer

• EPROM: NMOS/CMOS, 1702*, 2708*, 27xxx and 27Cxxx

series, with 8/16 bit data width, full support for LV series

• EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series,

with 8/16 bit data width

• Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx,

29Wxxx, 49Fxxx series, from 256Kbit to 32Mbit, with 8/16 bit

data width, full support for LV series

• Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx,

59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx

series, full support for LV series

• Configuration (EE)PROM: XCFxxx, XC17xxxx, XC18Vxxx,

EPCxxx, AT17xxx, 37LVxx

• PROM: AMD, Harris, National, Philips, Signetics, Tesla, TI

• NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK

STKxxx, XICOR 2xxx, ZMD U63x series

• PLD: Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX

7000S, MAX7000AE

• PLD: Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA,

ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV,

ispLSI2xxxVE, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-

xx/xx

• PLD: Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner

XPLA3, CoolRunner-II

• other PLD: SPLD/CPLD series: AMI, Atmel, AMD-Vantis,

Gould, Cypress, ICT, Lattice, NS, Philips, STM, VLSI, TI

• Microcontrollers 48 series: 87x41, 87x42, 87x48, 87x49,

87x50 series

• Microcontrollers 51 series: 87xx, 87Cxxx, 87LVxx, 89Cxxx,

89Sxxx, 89LVxxx, all manufacturers, Philips 87C748..752