User`s manual

Technical specification

HARDWARE

Base unit, DACs

• USB 2.0 port

• FPGA based IEEE 1284 slave printer port, up to 1MB/s

transfer rate

• on-board intelligence: powerful microprocessor and FPGA

based state machine

• three D/A converters for VCCP, VPP1, and VPP2,

controllable rise and fall time

• VCCP range 0..8V/1A

• VPP1, VPP2 range 0..26V/1A

• autocalibration

• selftest capability

• protection against surge and ESD on power supply input,

parallel port connection

Socket, pindriver

• 48-pin DIL ZIF (Zero Insertion Force) socket accepts both

300/600 mil devices up to 48-pin

• pindrivers: 48 universal

• VCCP / VPP1 / VPP2 can be connected to each pin

• perfect ground for each pin

• FPGA based TTL driver provides H, L, CLK, pull-up, pull-

down on all pindriver pins

• analog pindriver output level selectable from 1.8 V up to 26V

• current limitation, overcurrent shutdown, power failure

shutdown

• ESD protection on each pin of socket (IEC1000-4-2: 15kV air,

8kV contact)

• continuity test: each pin is tested before every programming

operation