User`s manual

SOFTWARE

• Algorithms: only manufacturer approved or certified

algorithms are used. Custom algorithms are available at

additional cost.

• Algorithm updates: software updates are available approx.

every 2 weeks, free of charge.

• Main features: revision history, session logging, on-line help,

device and algorithm information

Device operations

• standard:

• intelligent device selection by device type, manufacturer or

typed fragment of part name

• automatic ID-based selection of EPROM/Flash EPROM

• blank check, read, verify

• program

• erase

• configuration and security bit program

• illegal bit test

• checksum

• security

• insertion test, reverse insertion check

• contact check

• ID byte check

• special

• production mode (automatic start immediately after device

insertion)

• auto device serial number increment

• statistic

• count-down mode

Buffer operations

• view/edit, find/replace

• fill/copy, move, byte swap, word/dword split

• checksum (byte, word)

• print

Supported file formats

• unformatted (raw) binary

• HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax,

Tektronix, ASCII-space-HEX

• Altera POF, JEDEC (ver. 3.0.A), eg. from ABEL, CUPL,

PALASM, TANGO PLD, OrCAD PLD, PLD Designer

ISDATA, etc.