User`s manual

• Use only attached ISP cable. When you use other ISP

cable (other material, length…), programming may occur

unreliable.

• 865 can supply programmed device (pin 1 of ISP

connector) and target system (pin 5, 13, 14 of ISP

connector) with limitation (see Technical specification / ISP

connector), but target system cannot supply 865.

• 865 apply programming voltage to target device and

checks his value (target system can modify programming

voltage). If the programming voltage is different as

expected, no action with target device will be executed.

Note: H/L/read driver on pins 3 and 10

1n0

315R

H/L/read

driver

ISP

connector

H/L/read driver on pins 2, 4, 6 and 8

150R

H/L/read

driver

ISP

connector

Self test and Calibration

If you feel that your programmer does not react according to

your expectation, please run the programmer self test using

Diagnostic POD, enclosed with the standard delivery package.

For optimal results with programmer we recommend you

undertake every 6 months, an extended test and to check the

calibration. See instructions for self test in the Diagnostics

menu of PG4UW.

Technical specification