User`s manual

Device / Device options / Associated file
This command is used for setting associated file with current
device. This is a file, which can be automatic loaded to buffer
after device is selected from default devices select list or by
start control program.
You can edit the associated file name in file name box, put a
full pathname. The control program checks the present of this
file on the disk. Also is possible enabling or disabling automatic
load of this file.
You can save both settings i.e. associated file and enabling of
automatic load of this file to disk by command File / Exit and
save.
Device / Device options / Special options
The special terms used here are exactly the terms used by
manufacturer of respective chip. Please read the
documentation to the chip you want to program for explanation
of all used terms.
Device / Blank check
This command allows to blank check of all devices or its part if
possible. The control program reports a result of this action by
a write of a warning message to INFO window.
The menu command Device / Device options / Operation
options allows to set another working area as the standard.
Device / Read
This command allows reading all devices or its part into the
buffer. The control program reports a finish of this action by
write a message to INFO window.
The menu command Device / Device options / Operation
options allows to set another working area as the standard.
Setting an option Verify data after reading in this menu
command means a higher reliability for device reading.
Device / Verify
This command compares the programmed data of the all
device or its part with data in buffer. The control program
reports a result of this action by a write of an error message to
INFO window.
The menu command Device / Device options / Operation
options allows to set another working area as the standard.
By the setting in the menu Options / Display errors the
command lets to write the found errors on the display or write
130