User`s manual

Note: If word size was selected, a low byte of checksum value
will be written on address specified in box Insert address and a
high byte will be written on address incremented by one.
Calculate: Click on the button Calculate starts calculating
checksums for selected block in buffer. No writes into the
buffer are executed.
Calculate & insert: Click on the button Calculate & insert
starts calculating checksums for selected block in the buffer
and writes the chosen checksum into the buffer on address
specified by Insert address.
Device
Menu Device includes functions for a work with selected
programmable devices - device select, read data from device,
device blank check, device program, device verify and device
erase.
Device / Select from default devices
This window allows selecting the desired type of the device
from list of default devices. This one is a cyclic buffer in which
are stored last 20 selected devices including its device options.
This list is saved to disk by command File / Exit and save.
If you wish display additional information about the current
device, use an <Ctrl+F1> key. This command provides a size
of device, organization, programming algorithm and a list of
programmers (including auxiliary modules) that supported this
device. You can find here package information and other
general information about current device too.
Use a <Del> key for delete of current device from list of default
devices. There isn’t possible to empty this list, if you repeat this
access. The last device stays in buffer and the <Del> key isn't
accepted.
Device / Select device ...
This window allows selecting the desired type of the device
from all devices supported by current programmer. It is
possible to choose device by name, by type or by
manufacturer.
Selected device is automatically saved to buffer of default
devices. This buffer is accessible with Device / Select from
default devices command.
113