User`s manual

control program
Menu bar list of basic functions
Filename information on the currently loaded
file in buffer
Programmer window information about the status of the
programmer and PG4U/PG4UW
Addresses window organization, size, start and end
addresses of the target device, buffer
and file
Device window all relevant information about the
current target device
Help bar a brief description of selected
command
Menu selection is carried out in the normal GUI fashion - either
by cursor moving plus pressing <Enter>, or by typing the
highlighted letter in the wanted menu or - of course - by
mouse. Hot-keys are available for even quicker selection of
intensely used commands.
Note: Data entered through keyboard is in HEX format,
excepting ASCII blocks in Buffer/View/Edit command.
List of hot keys
<F1> Help Calls Help
<F2> Save Save file
<F3> Load Load a file into the buffer
<F4> Edit Viewing/editing of buffer
<F5> Select/default Target-device selection from
10 last selected devices list
<Alt+F5> Select/manual Target-device selection by
typing device/vendor name
<F6> Blank Blank check
<F7> Read Reads device's content into
the buffer
<F8> Verify Compares contents of the
target device with the buffer
<F9> Program Programs target device
<Alt+Q> Exit without save Terminates the PG4UW
<Alt+X> Exit and save Terminates the PG4UW and
saving settings too
<Ctrl+F1> Displays additional
information about current
device
<Ctrl+F2> Erase Fill's the buffer with a given
value
<Ctrl+Shift+F2> Fill's the buffer with random
values.
File
102