User`s manual

Run the control program
In Windows environment: double click to icon PG4UW.
After start, control program PG4UW automatically scan all
existing ports and search for the connected any B+K
Precision’s programmer. Program PG4UW is common for
these B+K Precision’s programmers, hence program try to find
all supported (865, 866, 864, 844USB, 844A, 848, 848A and
849) programmers.
Notes: When the PG4UW program is started, program is
checked for its integrity. Than the program display a standard
user menu and waits for your instructions.
If the control program cannot communicate with the
programmer, an error message appears on the screen,
including error code and description of possible reasons
(disconnected programmer, bad connection, power supply
failure, incompatible printer port, ...). Eliminate the error source
and press any key. If error condition still exist, the program
resumes its operation in the demo mode and access to the
programmer is not possible. If you cannot find the cause of the
error, follow the instructions in Troubleshooting section. In
addition, the control program checks communication with
programmer prior to any operation with the programmed
device.
Description of the user screen
Windows program PG4UW
Header bar the name, copyright statement and
version of the PG4U/PG4UW the
101