Owner's manual

Trigger Menu

F1: Manual – Selects manual as the trigger source.

To trigger the waveform generator,

press this MANUAL trigger button again.

F2: Internal – Selects the internal trigger generator

as the trigger source. Change the

internal trigger rate displayed with the rotary input

knob.

F3: External – Selects the external trigger signal as

the trigger source. The trigger source

is supplied through the TRIG IN connector.

In BURST MODE, the F4 key displays N-Burst,

representing the number of burst cycles to output

with each trigger. The N value can be changed from

2 to 65,535.