Instruction Manual

114
DESCRIPTION The TRIG_COUPLING command sets the
coupling mode of the specified trigger source.
The TRIG_COUPLING? query returns the
trigger coupling of the selected source.
COMMAND SYNTAX <trig_source>: TRig_CouPling <trig_coupling>
<trig_source>: = {C1, C2, C3, C4, EX, EX5,
LINE}
<trig_coupling>: = {AC,DC,HFREJ,LFREJ}
QUERY SYNTAX <trig_source>: TRig_CouPling?
RESPONSE FORMAT <trig_source>: TRig_CouPling <trig_coupling>
EXAMPLE The following command sets the coupling mode
of the trigger source Channel 2 to AC:
Command message:
C2: TRCP AC
RELATED COMMANDS TRIG_COUPLING, TRIG_DELAY,
TRIG_LEVEL, TRIG_MODE, TRIG_SELECT,
TRIG_SLOPE
ACQUISITION TRIG_COUPLING, TRCP
Command /Query