User manual

Menu Operation

Pass/Fail

The oscilloscope first measures the input source signal and

compares it with Pass/Fail settings, and then outputs the

Pass/Fail result.

Press UTILITY → Pass/Fail to display the PASS/FAIL menu

1/2.

Softkey Options Description

Enable Test

ON Pass/Fail function on

OFF Pass/Fail function off

Source

CH1 Source signal CH1

CH2 Source signal CH2

Operate



Start Pass/Fail test



Stop Pass/Fail test

Setup Mask

---- Set up the regulations

More 1/2

---- Display the menu 2/2