User manual

Arbitrary Waveform Generator
155
Pulse Output
Press the Output Type softkey to select Pulse waveform,
PULSE menu will be displayed.
Softkey Description
Output
Type
Press Output Type to
select a
standard waveform or modulated
signal to output
Freq /
Period
Press this softkey
to toggle
selection between frequency and
period parameter. Use the left or
right keys below the adjustment
knob to
change cursor
selection (selection will be in red
color) and rotate the adjustment
knob to change the value of the
selected digit. W
hen a unit is
selected (i.e. Hz, kHz, MHz),
rotating the knob will change the
parameter upward or downward by
x10. Units will automatically
change accordingly.
Note: Only Period selection
can be adjusted. Freq selection
is for reading and display
purposes only and reflects the
frequency of the output