User Manual

Getting Started
23
3. The square brackets show the location of current display
window within the whole captured waveform. The
captured waveform color corresponds with the active
waveform color (CH1: yellow; CH2: cyan).
4. Horizontal center position icon shows the horizontal
center location within the captured waveform.
5. Trigger position icon shows the trigger location within the
record waveform.
6. Acquisition status:
AUTO – “Auto” mode.
STOP – Stop acquiring waveform data.
WAIT – Waiting to be triggered.
Trig’d – DSO has seen a trigger and is acquiring
post-trigger data.
Trig? – Looking for trigger
ROLL – When horizontal mode is set to “Roll”
7. Soft key menu which allows you to set up additional
parameters from front-panel soft keys.
8. The display area contains the waveform acquisitions,
channel identifiers, trigger and ground level indicators.
Each channel’s information appears in their respective
color.
9. Trigger readout shows trigger information such as trigger
source, trigger type as well as trigger level.