User Manual

Quick Start Guide
201
Perform the following steps to take voltage measurement.
 Press the CURSOR key to display the CURSOR menu.
 Press Mode softkey to select the Manual mode.
 Press Type softkey to select the Voltage type.
 Press Y1--/ Y2—softkey or press the entry knob to
select Y1 cursor.
 Rotate the entry knob to move the Y1 cursor.
 Press Y1--/ Y2—softkey or press the entry knob to
select Y2 cursor.
 Rotate the entry knob to move the Y2 cursor.
 ΔY displayed in the softkey area is the voltage difference
between Y1 and Y2.