User Manual

Arbitrary Waveform Generator
160
User Programmable Arbitrary Waveform Output
Press the Output Type softkey to select User ARB waveform,
ARB menu page 1/2 will be displayed.
Softkey Description
Output
Type
Press Output Type to
select a
standard waveform or modulated
signal to output
Freq
Press this softkey
to toggle
selection between frequency and
period
parameter. Use the left or
right keys below the adjustment
knob to
change cursor
selection (selection will be in red
color) and rotate the adjustment
knob to change
the value of the
selected digit. W
hen a unit is
selected (i.e. Hz, kHz, MHz),
rotating the knob will change the
parameter upward or downward by
x10. Units will automatically
change accordingly.
Ampl
Press Ampl to select
and change
the amplitude parameter.