User Manual

Arbitrary Waveform Generator
153
Sine Output
Press the Output Type softkey to select Sine waveform.
SINE menu will be displayed.
Softkey Description
Output
Type
Press Output Type to select a
standard waveform
or modulated
signal to output
Freq
Press the Freq
to select the
frequency parameter. Use the left
or right keys below the adjustment
knob to
change cursor
selection (selection will be in red
color) and rotate the adjustment
knob to change the value of the
selected digit. W
hen a unit is
selected (i.e. Hz, kHz, MHz),
rotating the knob will change the
parameter upward or downward by
x10. Units wil
l automatically
change accordingly.
Ampl
Press Ampl
to select and change
the amplitude parameter.
Offset
Press Offset to select and change
the offset parameter.