User Manual

ManualsBrandsB&K Precision ManualsTools240 - Datasheet

One Year Warranty

Model 230A

Multi-Network Cable Tester

The 230A tests thin Ethernet (BNC), 10BaseT (UTP/STP), 100BaseTx, RJ45, TIA-

568A, TIA-568B, and Token Ring cables within a few seconds. It detects miswiring,

polarization, and continuity. The 230A also tests the ground of shielded twisted

pair cables. With the remote unit, you can remotely test installed cable either from

the wall plate or patch panel.

■ Auto scans thin Ethernet (BNC),10Base T (UTP/STP),

100BaseTx, RJ45, 356A,TIA-568A,TIA-568B, and Token Ring

cables in seconds

■ Detects miswiring, polarization, and continuity

■ Also tests the ground of shielded twisted pair cables

■ Tests cables before or after installation with the remote unit

■ LED display for clear indication of problems

■ Protective rubber boot

■ Belt clip

Model 231A

Deluxe Multi-Network Cable Tester

The 231A can easily read the correct pin configuration of 10BaseT cable (cate-

gory 5), 100BaseTx, 10Base2 cable (coax) and RJ45/RJ11 modular cables,

356A, TIA-568A, TIA-568B and Token Ring cables by comparing one trans-

mitting end to the corresponding receiving end. With the remote kit, it can test

cables installed far away either on wall plate or patch panel up to 1000ft away.

It is easy to verify the cable continuity, open, short, and cross connect, featur-

ing auto or manual scan for pin-out indicators.

■ Tests 10BaseT, 100BaseTx, 10Base2, RJ45, RJ11, 356A,

TIA-568A,TIA-568B, and Token Ring cables

■ Detects open, short, cross, and continuity

■ Tests Point-to-Point, rather than Pair-to-Pair

■ Quick and easy to use

■ Tests cables on wall plate or patch panel up to 1000 ft away

with the remote kit

■ Easy to read LED display

■ Protective rubber boot

■ Belt clip

Cable Type

10BaseT ✔✔✔

10Base2 ✔✔✔

100BaseTx ✔✔✔

RJ45 ✔✔✔

RJ11 ✔

356A ✔✔

TIA-568A ✔✔✔

TIA-568B ✔✔✔

To ken Ring ✔✔✔

Test Type

Open ✔✔✔

Short ✔✔✔

Reverse ✔✔✔

Cross ✔✔✔

Split ✔✔

Power Source 9V Battery 9V Battery 9V Battery

Dimensions (HxWxD) 5.4x3x1.6” 5.2x3x1.6” 4.1 x 3 x 1.4"

(137 x 76 x 40mm) (132 x 76 x 40mm) (103 x 75 x 36mm)

Weight 6.8oz. (193g) 7.1oz. (201g) 0.4 lbs. (185g)

Specifications

models

230A 231A 235

SUPPLIED: Master Unit Master Unit Master Unit

Remote Terminator Remote Terminator Remote Terminator

3 Patch Cables Carrying Case

BNC to BNC adapter

Accessories

230A

231A

Summary of content (2 pages)

PAGE 1
Specifications 230A Cable Type 10BaseT 10Base2 100BaseTx RJ45 RJ11 356A TIA-568A TIA-568B Token Ring Test Type Open Short Reverse Cross Split Power Source Dimensions (HxWxD) Weight 231A ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 9V Battery 5.4x3x1.6” (137 x 76 x 40mm) 6.8oz. (193g) Accessories SUPPLIED: Master Unit Remote Terminator 231A models 235 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 9V Battery 5.2x3x1.6” (132 x 76 x 40mm) 7.1oz. (201g) ✔ ✔ ✔ ✔ ✔ 9V Battery 4.1 x 3 x 1.4" (103 x 75 x 36mm) 0.4 lbs.
PAGE 2
35 Model 235 Remote Network Cable Tester The 235 network cable tester is an easy and effective cable tester which can test all the wiring faults of 10Base2 (Coax), 10BaseTx, 100Base Tx, RJ45, 356A, TIA-568A, TIA-568B and Token Ring cables. It can identify not only the wiring faults, such as open pairs, shorted pairs, reversed pairs, crossed pairs and split pairs, but can also identify up to 4 different cables at one end.