Specifications

53
Position 1X:
Attenuation ratio 1X (1:1)
Bandwidth DC to 6 MHz (-3 dB)
Rise time 58 ns
Input resistance 1 MΏ (oscilloscope input resistance)
Input capacitance 56 pF (plus oscilloscope capacitance)
Max. input voltage
300 V CAT I, 150 V CAT II (DC + peak AC) derated with
frequency (see figure below) Pollution Degree 2
Max. operating temperature 0 °C to 50 °C
Humidity 85% RH or less (at 35 °C)
Cable length 1.2 m (48")
Max. float voltage 30 Vrms (between reference lead and earth ground)
Some definitions are also given:
Measurement Category II
CAT II is for measurements performed on circuits directly
connected to the low voltage installation. Examples are
measurements on household appliances, portable tools,
and similar equipment.
Pollution Degree 2
Refers to an operation environment where normally only
dry non-conductive pollution occurs. Occasionally, a
temporary conductivity caused by condensation must be
expected.
The probe's operating voltage is derated as the frequency is increased:
Figure 40
All content Copyright © B&K Precision Corporation, except where otherwise noted.
Copying/reprinting/republishing without express written consent prohibited.