Specifications

26
24 50%
Sets the trigger level to 50% of the amplitude of the waveform being
used to trigger the scope. This is useful when NORMAL trigger mode is
selected and the scope is not triggering because the trigger level isn't
set correctly.
25
MENU
Turns on trigger menu.
26
LEVEL
Adjusts trigger voltage level. Press the knob to set it to 0 volts.
27
MENU ON/OFF
For any displayed menu, turns the menu on and off.
28 None
This knob is the general-purpose adjustment knobs for numerical
settings and menu choices in menus. When you've turned the knob to
choose a selection in the menu, press the knob to select that menu item
(it will click). When this knob is active, a green arrow in a circular pattern
is illuminated above the knob, alerting you that the knob will adjust
something. If the arrow is not visible, then the knob will adjust the
scope's intensity.
29 SAVE/LOAD
Toggles the SAVE/LOAD menu. Save or load setups and traces
(waveforms) from internal or external memory.
30 CURSOR
Toggles the CURSOR menu. Can turn cursors on, select their type, and
select what they measure.
31 DISPLAY
Toggles the DISPLAY menu. Sets various display features such as
vector or single points, persistence, trace intensity, grid (graticule) type,
grid brightness, color scheme, and how long menus are displayed.
32 SINGLE
Arms the scope to capture a single waveform after a trigger has
occurred.
33 RUN/STOP
Turns waveform acquisition on and off. A common use is that you see
something unusual on the screen and you press this button to stop the
scope from updating the displayed waveform so you can examine things
more carefully.
34 UTILITY
Toggles the UTILITY menu. Lets you set up which input/output interface
to use (serial, LAN, or USB), set up how the PRINT button (#1) works,
system setup features, language to use, various service functions, set
up PASS/FAIL testing, and perform calibrations.
35 MEASURE
Toggles the MEASURE menu. This menu lets you choose to display
various voltage and time metrics, such as RMS amplitude, peak-to-peak
amplitude, frequency, rise time, etc.
36 ACQUIRE
Toggles the ACQUIRE menu. Lets you set normal, averaging, or peak-
detect acquisition modes and select between real-time and equivalent
sampling.
All content Copyright © B&K Precision Corporation, except where otherwise noted.
Copying/reprinting/republishing without express written consent prohibited.