User Manual

PIN FUNCTIONS REMARKS

1 Internal DC +5 V Resistor end

2 Voltage Adjust Variable part of resistor

3 Current Adjust Variable part of resistor

4 Ground Resistor end

5 Output OFF Short to Ground

6 N/A

7 N/A

8 N/A

Table 5 – Remote Connector Plug Pin Assignment for Variable Resistors

3. Turn the remote control ON/OFF switch to ON position.

4. Switch on the power supply.

5. Check the output voltage range of the power supply by varying the 5 kΩ

variable resistor for voltage adjustment.

6. Short circuit the main output with 8AWG gauge wire and check the display

for CC setting by varying the 5 kΩ variable resistor for current adjustment.

7. Switch off the power supply.

5.1.3 Enable and Disable the Output

This remote output on/off control can be activated in any of the modes.

By default, Pin 5 is open and output is on.