User manual

Returned Parameters: <NR1> 0 indicates the ac source has passed selftest.

Non zero indicates an error code.

TRP RST

This command resets the instrument to exit out of any trip related condition.

Command Syntax: TRP RST

Parameters: None

Examples: TRP RST

READ?

This command returns the run time status of parameters of the instrument. It returns voltage (<value>V),

current(<value>A) ,range mode (HI /LOW),frequency (<Value>Hz), power(<value>W), instrument mode

(REM/LOC), output status (ON/OFF).

Command Syntax: READ?

Parameters: None

Example: Read?

Returned Parameters: 280.0V<SP>14.00A<SP>HI<SP>115.00Hz<SP>7W<SP>LOC<SP>OFF