User manual

22
-420 QUERY UNTERMINATED
-224 ILLEGAL PARAMETER
SYST:LOC
This command sets the interface to Local state which enables the front panel controls of the instrument.
Command Syntax: SYST:LOC
Parameters: None
Examples: SYST:LOC
Returned Parameters: None
SYST:REM
This command sets the interface to Remote state which disables the front panel controls of the instrument.
Command Syntax: SYST:REM
Parameters: None
Examples: SYST:REM
Returned Parameters: None
SYST:VERS?
This query returns the SCPI version number to which the AC source complies. The value is of the form
YYYY.V, where YYYY is the year and V is the revision number for that year.
Query Syntax: SYST:VERS?
Parameters: None
Examples: SYST:VERS?
Returned Parameters: <NR2>
SYST:CONFIG
This command configures the mode of instrument like HI or LO. This command is same as
[SOUR:]VOLT:RANG but has been added to give the flexibility to user and at the same time to be
compliant to SCPI standards.
Command Syntax: SYST:CONFIG
Parameters: HI | LOW
*RST Value: HI
Examples: SYST:CONFIG<sp>HI
Query Syntax: SYST:CONFIG?
Returned Parameters: HI|LOW
Related Commands: VOLT:RANG
STATUS SUBSYSTEM
STAT:TRIP?
This command returns the current status of Trip condition. It returns 0 if no trip has occurred and returns a
string response for appropriate trip condition.
Query Syntax: STAT:TRIP?
Parameters: None
Examples: STAT:TRIP?
Returned Parameters: <string | NR1>.