User manual

The world of flow
Seite 15
Scaling factor, Channel A - Rate meter
You may set the scaling factor (SF) in the range of 0.0001
to 99.9999 as explained for setting the pulse constant.
The scaling factor is used when converting one physical
unit to another (e.g., diameter to perimeter, liters to gallons).
Time-out Period, Channel A - Rate meter
You can set the desired timeout period (time out) after
which the display is reset to zero if the operating frequency
is so low (or zero) that the measuring time would be
intolerably long.
The timeout period can be set in the range of 1s to 99s.
Example: Set timeout period to 10s
Press <R:
Press ^ 5 times: Press <R:
Press ^: Press S/E:
The world of flow
Seite 16
Count Frequency, Channel B – Pulse Counter
maximum frequency 10 kHz maximum frequency 30 Hz
Scaling Factor, Channel B – Pulse Counter
You can set the Scaling Factor in the range of 0.0001 to
99.9999.
Set the scaling factor as described under Scaling Factor,
Channel A.
Decimal point, Channel B – Pulse Counter