User manual

The world of flow
Seite 11
Time-out period, Channel A
This display identifies the pulse counter (Channel B); it
cannot be changed.
Count frequency, Channel B Scaling factor, Channel B
Decimal point, Channel B Reset-key enabled,
Channel B
You can make changes within each menu point as follows:
1. Press the <R key:
The parameter to be changed is activated, i.e., it begins to
flash.
The world of flow
Seite 12
2. Press ^ repeatedly if necessary:
Set the desired parameter.
3. Press S/E:
The parameter just set is confirmed and
displayed steadily.
4. Press S/E again:
You reach the next menu item.
See the possible settings allowed in each menu from the
following figures.
Flashing display elements are shown in a lighter color.
Physical unit, Channel A – Rate meter
Selecting the physical unit:
Physical unit: 1/min Physical unit: 1/h
Physical unit: l/s Physical unit: l/min