Owner's manual

15
USING THE LOG KEY
Press the LOG key to cycle through the following options:
• TRIP NM Trip Log, resetable log that can be
displayed in Nautical Miles NM or Statute
Miles M. This is determined by the
selection of the displayed speed units (see
SETTING THE SPEED AND LOG UNITS).
It also resets the Maximum and Average
Speed values.
• LOG The Stored Log, in NM or M as above.
• DR D NM Dead Reckoned Distance, in NM or M as
above. This is a resetable value to be used
in conjunction with DR C
0
M.
• DR C
0
M Dead Reckoned Course, in degrees
magnetic. For this function to be used
Heading must be supplied via the system
network from the Network PILOT.