User Manual

40
SELECTING THE RECEIVER INPUT TYPE
If your GPSPlus system has a LORAN-C or DECCA
receiver, connected to the second receiver socket on the
rear of the unit, this can be selected to give positional
information. All of the features and functions of the GPSPlus
can be used with any of the receivers. This allows you to
select a different position fixer if one becomes unreliable, or
to compare accuracy of position.
1. Press the
POS
key so
HDOP
is displayed on the text
line.
2. Press the SETUP key. The display will show the current
INPUT
device.
3. Press the
ENTER
key
GPS
will now flash. Use the
STEP
knob to change the INPUT device,
LORAN-C, DECCA.
4. Press the ENTER key to memorise the new setting.
5. After 30 seconds the display will return to present
position or press the POS key to return instantly.
WAYPOINT ARRIVAL ALARM
The waypoint arrival alarm is always active, i.e. it CANNOT
be disabled. It is used in conjunction with the auto advance
function. The auto advance function is used to automatically
select the next waypoint in a route or sailplan. The waypoint
arrival alarm is triggered when the vessel is within a preset
radius around the target waypoint. The alarm is triggered in
two ways.
1. When the vessel arrives at the target waypoint within the
radius set for the auto advance function the display will
sound its alarm and flash ARRIVED. Other Network units
will also sound their alarms.
SEtUP
I
n
PU
t
GPS