User Manual

20
COPYING FROM WAYPOINT TO WAYPOINT
1. Press the WPT/MOB
key. Use the ▼ STEP ▲
knob to select the target
WPT number (or name).
2. Press the SETUP key 3
times. The display will
show COPY A WAYPT.
3. Press the ENTER key.
Use the ▼ STEP ▲ knob
to select the waypoint to
be copied. The waypoint
number and name will be
displayed.
4. Press the ENTER key.
Use the ▼ STEP ▲ knob
to select the target
waypoint. The waypoint
number and name will be
displayed.
5. Press the
ENTER
key to
copy the waypoint to the
library location. The
display will show
COPY A
WAYPT
.
6. Press the
WPT/MOB
key. The display will show
you the "new" waypoint.