Manual

SELECTING THE DISPLAY MODE
The Network DEPTH unit has two operating modes. The
correct mode must be selected for your network system
to operate properly.
trA
Transducer mode, the unit uses and displays depth
data from a depth sensor connected directly into the
display unit.
rEP
Repeater mode, the unit operates as a depth
repeater using data from the system network.
Press
SIGNAL
key.
Press
SETUP
key
to display the
current mode.
Press
ENTER
key
if the mode needs
to be changed.
Use
S
or
T
to
change mode.
Press
ENTER
to
memorise the
new mode.
Press
SIGNAL
key to complete
the change.
610-HB-0501-04
5