User guide

NETWORK COMPASS USER MANUAL

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE

Display fails to light up Power not connected.

Supply not 10 to 16 Volts.

Data is not repeated from Network Compass not in repeater mode.

Cables not correctly fitted.

Compass fails to calibrate (-F-) Calibration manoeuvre performed badly.

Compass installed too close to onboard

metallic object.

Calibration manoeuvre attempted near to

large metallic vessel or equipment, e.g.

loading crane.

Display shows a number and the Error message. Switch off and restart. (If

alarm buzzer sounds the message persists after three restart

attempts contact your authorised dealer

for assistance.)

-C- error message Compass fluxgate error. Switch off check wiring.

Check that fluxgate is not too close to a metallic

object. (If the message persists after three restart

attempts contact your authorised dealer for

assistance.)