Manual

5 - 24

Press

SETUP

key, select

SET

RDM

Move the

wheel to the

midships

position. Check

that the boat

settles onto a

steady, straight

course.

Press

ENTER

to reset the

midships

position, the

display

confirms the

setting is

successful.

CALIBRATION OF THE PILOT COMPASS

This procedure will automatically correct the autopilot's compass for any

deviation errors. It should be carried out in open water, preferably on a

calm day, with minimal wind and waves.

Press

SETUP

key, until the

display shows

SWING

2. Press

ENTER

to start the swing.

With the speed below 5 knots,

turn the boat through 360

at a

rate of turn not greater than 2

per second i.e. the turn should

take about 3 minutes to

complete. The display will show

the amount of turn completed so

far in degrees.