Manual

5 - 20
VERIFY OPERATION OF RUDDER DRIVE
•
Power Steer mode can be used to verify that the Rudder Drive is
operating correctly.
•
Turn the wheel so the rudder is in the midships position (if possible).
NOTE:
When the
AUTO
key is pressed the rudder will return to the
position it was in when
POWER
steer was engaged. If the rudder was
set at the midships position then
AUTO
key will return it to that position.
Press
SETUP
key, select
POWER
.
With the
rudder
amidships.
Press
AUTO
key
to engage
power
steer.
Use the
<10
or
10>
keys to
move the
rudder
3
º
to port or
starboard
for each
press.
Use the
<1
or
1>
keys
to move
the rudder
0.6
º
to port
or
starboard
for each
press.