Manual

5 - 11
SETTING THE RUDDER END STOPS
Before the Network PILOT can be used it must know the position of the
rudder end stops.
SETTING THE PORT END STOP
Press
SETUP
key, select
SET
RDP
Move the
rudder to hard
over port
position.
Press
ENTER
to set
PORT
end stop, the
display
confirms
setting is
successful.
SETTING THE STARBOARD END STOP
Press
SETUP
key, select
SET
RDS
.
Move the
rudder to hard-
over starboard
position.
Press
ENTER
to set
STBD
end stop, the
display
confirms
setting is
successful.