Specifications

H3000 Pilot Handbook___________________________________________________
HB-3001-02
60
SEA TRIAL
Before using the Pilot the following parameters must be set and
configured during a sea trial.
SETUP X COMMISSION X PILOT
Step 1: Select Sea Trial
SEA TRIAL ↵
Step 2: Set Rudder Mid Point.
Steer the boat manually under motor at a speed no greater than 15 knots.
Head towards a landmark and maintain a straight course.
The rudder bar may well show a slight deviation from the centre line that
was set at the dockside. When you are happy that you are on a straight
course highlight OK without moving the wheel and press ↵ This will reset
the rudder mid position to zero.
T RUDDER MID POINT ↵