User Manual

h2000 Autopilot User Manual
Part 4 - Installation Information
HB-0842-04
4-2
CONTENTS (Contd.)
ILLUSTRATIONS
Fig No Page
4.1 ACP Unit Terminal Details 4-5
4.2 DIP Switch Location 4-7
4.3 Network and Alarm Connections 4-8
4.4 Autopilot Display Connections 4-9
4.5 MOB, Joystick, Hand-held Controller
Connections 4-10
4.6 Hydraulic Ram Drive Connections 4-11
4.7 Continuous Drive Connections 4-12
4.8 Direct Speed Input Connections 4-13
4.9 Linear Feedback Connections 4-14
4.10 Gyro Stabilised Compass Connections 4-15
4.11 Plan View - Typical System with Tiller Arm and
Quadrant 4-17
4.12 Steering System Orientation 4-17
4.13 RRF Position 4-18
4.14 Drag-Link and RRF Position 4-18
4.15 Linear Feedback Unit 4-19
4.16 Sterndrive Unit Connections 4-21
4.17 Rotary Drive Connections 4-22
4.18 Proportional Solenoid Connections 4-23
4.19 Non-B&G Paddle Connection 4-24
TABLES
Table No Page
4.1 All Rudder Drives - Heavy Duty Power Cables 4-4
4.2 Rams and Rotary Drives - Clutch/Valve Cables 4-4
4.3 Wire Colour Coding/Abbreviations 4-5
4.4 DIP Switch Selection 4-6
4.5 Non-B&G Paddle Connection 4-25