Owner's manual

HB-0845-06 73
The damping on this function is adjustable and can be
important. In rapidly changing tidal situations you need to
lower the damping down as far as possible to be able to see
the changes quickly. Conversely, in a steady tide or current
the longer the period over which the calculation is averaged,
the more accurate the results will be.
The lag in the position fixer's ability to adjust to rapid
changes in direction, such as when tacking, should also be
borne in mind when considering the results of this function.
Frequent tacking produces figures that are unreliable and
should be treated with caution.
2.9.46 Timer
Menu heading: TIME
Function text: TIMER
Update rate: 1Hz
Units: Hours, Minutes, Seconds
Note
1. Can be reset independently of other trip functions
Used for both the start and to record elapsed time. The timer
will act as either a stopwatch or a countdown.
The Enter key will toggle the display between
minutes/seconds and hours/minutes. Paragraph 2.6.1
describes control of the timer.
2.9.47 Time to Layline
Menu heading: TIME
Function text: TIME L/L
Update rate: Provide by the position fixer
Units: Hours, minutes, seconds
Note
1. Requires NMEA 0183 interfaced position-fixing
system transmitting the ZDL sentence.