Owner's manual

HB-0845-06 51
To calibrate against another voltmeter, measure the supply
voltage and then enter this actual voltage into:
MOTOR →
→→
→ VOLTS, CALBRATE →
→→
→ CAL VAL1
2.9.9 Bearing to Waypoint
Menu heading: WAYPOINT
Function text: BTW RMB or BTW GC
Update rate: Provided by the position fixer
Units: ºM or ºT
Notes
1. Requires interfaced position fixing system.
2. Rhumb Line or Great Circle
Once the position fixer is connected and sending
information, the information gathered automatically appears
in the menu and becomes available for display.
2.9.10 Bearing Waypoint to Waypoint
Menu heading: WAYPOINT
Function text: BRG W-W
Update rate: Provided by the position fixer
Units: ºM or ºT
Note
Requires interfaced position fixing system. This is the
bearing from the active waypoint to the next waypoint on
the active route.
2.9.11 Boat Speed
Menu heading: SPEED
Function text: BOAT SPD
Update rate: 4Hz
Units: Knots, MPH or KPH
Notes
1. Automatic calibration facilities.