Owner's manual

h2000 User Manual
44 HB-0845-06
2.6.2 Rolling 5 Timer
As an alternative to the main settable timer, a ‘rolling 5’ is
provided. This simply cycles from 5:00 minutes to zero then
starts again counting down from 4:59, until stopped. The
same START, STOP and SYNC functions as used in the
settable timer are available in the CONTROL menu.
2.6.3 Timer Alarm Sounder
When the timer is counting down, the Audible Alarm
(optional, fitted to the h2000 Main Processor) will sound
every 10 minutes until the counter reaches 10 minutes to go,
the alarm sounder will then sound briefly at the following
intervals:
5:00, 4:00, 3:00, 2:00, 1:00, 0:30, 0:15, 0:10, 0:05 and 0:00.
2.6.4 Reset Trip Log
1. Select TRIP LOG on the upper display.
2. Press Scroll Down once, the lower display shows
CONTROL flashing.
3. Press Enter, and then press Scroll Down
repeatedly until the display shows RESET
flashing.
4. Press Enter and the display shows the TRIP LOG
reset and RUN in the lower menu flashing.
5. Press Enter again and the display now shows the
TRIP LOG running.
6. Press Page to resume normal operation.
Each time you reset the TRIP LOG, the AVERAGE SPEED
resets and begins its calculation again. The control facility
for the Dead Reckoning functions work in the same manner.
The bearing and distance are linked, so that when one is
started, both start.